Low maintenance, weather-ready, and built to last decades. Hundreds of styles and colors to match your home's character.
Call for a Free Quote: +1-844-782-0929
Our crews install vinyl every week. That repetition builds genuine skill -- tighter joints, proper expansion gaps, and correct fastener technique that holds up season after season.
Choosing vinyl siding involves more than picking a color. We discuss profile style, panel width, trim coordination, and how different finishes photograph in natural light on your home.
Vinyl siding needs room to expand and contract with temperature changes. Incorrect nailing tension or missed expansion gaps cause waves, buckling, and panel pop-out. We install to manufacturer specifications on every project.
We only install products from manufacturers whose warranty terms we stand behind. We walk you through coverage before the project starts so you understand exactly what is protected.
From the initial substrate check through final trim detail, our installation crews handle every step. Clean, precise, and built to last through North, SC's seasonal shifts.
We remove and properly dispose of existing siding, inspect the substrate for moisture or rot before covering it, and install new vinyl to manufacturer specs. Your home gets a fresh exterior backed by a full warranty.
Insulated vinyl siding incorporates a foam backing that improves thermal performance, adds panel rigidity, and provides a quieter exterior. A strong choice for North, SC homes with high energy costs or thin wall assemblies.
We install vinyl shake on full elevations and as accent panels alongside horizontal lap siding. Proper alignment and starter strip placement keep the staggered courses looking intentional, not ragged.
Vertical vinyl panels and board-and-batten profiles suit contemporary and farmhouse-style homes particularly well. We install vertical systems with proper furring strips for drainage and correct J-channel terminations at top and bottom.
Coordinated vinyl soffit and fascia complete the siding system and protect your roofline from moisture intrusion. We match profiles and colors to your siding for a finished, continuous look on every elevation.
Standard vinyl suits sheltered locations well. Premium grades matter most on high-sun, high-wind exposures where panel stiffness and color stability over time are priorities.
Thickness is measured in thousandths of an inch (mils or gauge). Thicker panels feel more solid, flex less in wind, and generally carry longer fade warranties. We provide thickness comparisons from the brands we carry so you can make an informed choice.
Insulated vinyl costs more upfront but reduces heating and cooling load, eliminates panel flex noise, and adds perceived quality. For North homeowners dealing with significant temperature swings, the energy offset can narrow the price gap over a decade of ownership.
We stock impact-rated options and recommend them for exposed elevations. Manufacturer documentation on impact ratings is available on request -- you should know what you are installing before work begins.
We assess your home, discuss grade and style options, and deliver a written estimate with material and labor broken out. No vague totals, no pressure.
Once you approve the estimate, we finalize your style and color selection using physical samples on your home, then place the material order. Lead times are confirmed before your install date is scheduled.
Installation progresses elevation by elevation, with trim and accessory pieces fitted as we go rather than added at the end. Quality checks happen during the work, not after.
We walk every elevation with you at project completion, check panel alignment, trim fit, and caulk coverage, and hand over your written workmanship warranty alongside the manufacturer documentation.
Vinyl siding is manufactured from polyvinyl chloride (PVC) resin compounded with stabilizers, pigments, and impact modifiers. The resulting panels are extruded at consistent thickness, then embossed with surface textures that mimic wood grain, cedar shake, or smooth lap board. Because the color runs through the full thickness of the panel rather than sitting as a surface coat, minor scratches and scuffs do not expose an underlying substrate. This characteristic distinguishes vinyl from painted wood or fiber cement and contributes directly to its maintenance advantage.
The physical behavior of vinyl in North, SC's climate is the central installation challenge. PVC expands considerably with temperature increases and contracts in cold. Panels installed on a mild spring day will be in a different dimensional state than the same panels on a July afternoon or a January morning. A professional crew nails into the center of the elongated nail slots so each panel floats freely within the designed tolerance. Driving nails tight -- even one or two per panel -- creates a fixed point around which thermal stress concentrates, producing the waves and buckles homeowners associate with cheap installation. The material itself is not cheap; the technique was.
Vinyl siding grades are measured primarily by panel thickness, expressed in thousandths of an inch. Products at the lower end of the market measure around .040 inches. Premium lines reach .044 to .050 inches or more. Thicker panels carry greater impact resistance, flex less in high winds, and maintain a flatter profile over long spans between studs. They also tend to carry more favorable fade warranties from manufacturers, because the pigment loading in premium grades is formulated for longer color stability under UV exposure. For most standard residential applications in North, a mid-range to premium thickness is a reasonable specification. Budget-grade panels are appropriate for low-exposure applications like enclosed porches or garage elevations with minimal sun and wind exposure.
Insulated vinyl siding takes the standard product and bonds a layer of contoured XPS or EPS foam to the back face. This foam layer does several things simultaneously. It increases the thermal resistance of the wall assembly modestly but consistently, typically adding between R-2 and R-4 to the exterior envelope depending on foam thickness. It eliminates the hollow-drum sound that standard vinyl produces when rain or hail strikes it. It also adds panel stiffness, which reduces oil-canning (the slight waviness visible on flat panels in raking light) and provides a more solid feel when the panel is pushed or struck. For older homes in North, SC with thin wall assemblies or insufficient insulation, the thermal contribution of insulated vinyl is a meaningful bonus on top of a new exterior appearance.
Beyond occasional washing, vinyl siding in North, North, SC asks very little of the homeowner. Do not use harsh solvents, abrasive compounds, or undiluted bleach on vinyl panels -- these can affect the surface finish permanently. For mildew on north-facing elevations, a soft brush with a diluted cleaner and a rinse works reliably. When you notice caulking at trim joints beginning to crack or pull away from the surface, that is the time to call for a caulk refresh before water finds its way behind the trim. Attending to caulk maintenance is the main annual task vinyl siding places on a homeowner, and it is a minor one.
Professionally installed vinyl siding in North, SC has a service life routinely measured in decades. Most manufacturer warranties run thirty to forty years on the product itself, with fade warranties covering a shorter window depending on color depth and grade. Dark colors absorb more heat and can fade somewhat faster than lighter neutrals. Professional installation from a licensed, insured contractor protects both the product warranty and your broader investment in the exterior. Homeowners who hire unlicensed crews often find that improper installation voids manufacturer warranties and leaves them without workmanship coverage when problems emerge. At SOS Roofing and Siding, both warranties -- product and workmanship -- are provided in writing before your project begins, so your protection is clear and documented from day one.
"We got quotes from four contractors. SOS Roofing and Siding was the only one who brought actual samples to our house so we could see the colors against our trim and roof in real light. That alone told us they knew what they were doing. The installation was flawless."
"The crew upgraded us to insulated vinyl after showing us the cost difference and what it would do for our north-facing wall. Best decision we made on the whole project."
"Replacing our failing vinyl revealed substrate damage we didn't know existed. SOS Roofing and Siding showed us photos, explained the repair, and handled it as part of the project without a runaround. Excellent communication throughout."
"From the estimate to the final walkthrough, every step was exactly as described. No cost overruns, no surprises, no missing trim pieces. Just a clean finished product and a crew that takes pride in the work."
